In addition to purchasing a compatible head unit replacement, a normal installation scenario also requires the purchase and installation of the right kind of steering wheel audio control adapter to facilitate communication between your factory controls along with your aftermarket head unit. If this sounds complex, it is--and it isn't. There is even more compatibility out there than you might think, with vast swaths of <a href="http://www.exeideas.com/?s=producers">producers</a> using the identical set of inter-operable communication protocols, so you have just a handful of options to worry about instead of dozens.

In some cases, you also have to program every one of your steering wheel switches to correspond to a certain head unit function. That will allow you a lot of freedom so far as customization is concerned, but it is an additional complication which you have to know about before you dig in to this type of job. If you are uncomfortable with wiring and programming your cartridge, a car audio shop should be able to give you a hand.

The first step in this method is to have a look at the different adapters available on the market and identify an <a href="http://www.autoradio-adapter.eu/produkt-kategorie/lenkradfernbedienung/"... für Lenkradfernbedienung</a> that will work with your car or truck. Each car conforms to a certain communication protocol, so it's vital to find an adapter kit which works with this specific protocol. Next is to have a look at the different head units which are harmonious with the <a href="http://www.autoradio-adapter.eu/produkt-kategorie/lenkradfernbedienung/"... für Lenkradfernbedienung</a>. For those who have almost any inquiries regarding where along with the way to use <a href="http://www.autoradio-adapter.eu/produkt-kategorie/lenkradfernbedienung/"... Adapter</a>, it is possible to email us with the web site. While this does narrow down your options somewhat, you'll still have a great deal of head units to choose from.

Installing steering wheel audio controls remains a job most DIYers can do in your home, but it's a bit more complex. Unlike a number of other car audio components, these devices are not really designed to be plug and playwith. There are ordinarily vehicle-specific installation procedures, and you usually have to splice into some of the factory wiring.

The most important thing is that, while you do need an adapter, then it is actually possible to construct an adapter when you've got the right levels of knowledge and experience. The matter is that this is not a DIY job that just anyone can tackle. If you are not capable of designing and implementing an adapter without any outside help, you're much better off simply buying one. Like so many other features of updating a car stereo, you need to form a battle plan before anything else. In the special case of steering wheel audio controls, planning ahead is important because several moving bits all have to come together in the right way.

We're not technically trained together with all the different steering wheel controller interfaces on various vehicles. Connects2 and other after-market accessories retailers developed universal CANbus boxes that can be programmed to work with electronic SWC and other functions. However, we have very limited understanding on this and you should contact your regional specialist car audio installer for assistance selecting the most appropriate adapter to work with your car and your new car stereo. They are also able to answer any questions you have about the setup and give you a few ideas about the job involved. Please do ask to see evidence or references that they do actually have the wisdom and experience to complete such a task.